Resistors for Hi-End Audio

Audio Note Tantalum

Current Stock of AN Tantalum
Tantalum 2W:
33R, 100R, 220R, 270R, 470R, 1K, 1K2, 1K5, 2K, 2K2, 2K7, 3K3, 4K7, 5K6, 6K8, 10K, 15K, 20K, 22K, 24K, 27K, 30K, 33K, 39K, 43K, 47K, 56K, 62K, 68K, 82K, 100K

Tantalum 1W:
22R, 82R, 100R, 330R, 470R, 560R, 604R, 680R, 1K, 1K2, 1K5, 2K, 2K2, 2K7, 3K3, 3K9, 4K7, 5K6, 6K8, 10K, 11K, 15K, 20K, 22K, 27K, 33K, 39K, 43K, 47K, 68K, 82K, 100K, 150K, 180K, 220K, 270K, 330K, 470K, 750K, 820K, 1M, 2M

Tantalum 1/2W:
10R, 47R, 56R, 75R, 100R, 110R, 150R, 220R, 249R, 270R, 294R, 330R, 390R, 470R, 560R, 600R, 1K, 1K2, 1K5, 1K8, 2K, 2K2, 2K7, 3K3, 4K7, 5K1, 5K6, 6K8, 8K2, 10K, 12K, 15K, 18K, 22K, 24K, 27K, 30K, 33K, 47K, 51K, 56K, 62K, 75K, 82K, 100K, 150K, 180K, 220K, 270K, 300K, 330K, 430K, 470K, 560K, 680K, 750K, 820K, 1M, 1M5

Tantalum Non-Magnetic 1/2W:
10R, 16R, 22R, 32R, 47R, 100R, 132R, 220R, 330R, 470R, 680R, 1K, 1K2, 1K5, 2K2, 3K3, 4K7, 5K56, 6K8, 10K, 15K, 18K9, 22K, 33K, 47K, 56K, 68K, 100K, 120K, 150K, 220K, 270K, 330K, 470K, 560K, 1M

Tantalum Non-Magnetic 1W:
22R, 100R, 220R, 470R, 1K, 1K2, 1K5, 2K2, 10K, 15K, 22K, 33K, 39K, 47K, 68K, 100K, 150K, 220K, 330K, 470K, 560K, 1M

Tantalum Non-Magnetic 2W :
100R, 470R, 1K, 1K5, 22K, 27K, 33K, 47K, 68K, 100K

Tantalum Silver Non-Magnetic 2W: The best hi-end audio resistors in the market!
100R, 220R, 390R, 470R, 1K, 1K2, 1K5, 3K3, 10K, 15K, 22K, 27K, 33K, 39K, 47K, 56K, 68K, 100K, 150K, 220K, 270K

	DxHmm	US$ each	1000 VND each
AN Tantalum 2W R<=100KOhm	-	14.90	330
AN Tantalum 2W R>100KOhm	-	24.50	540
AN Tantalum 1W	-	10.50	230
AN Tantalum 1/2W	-	5.20	115
AN Tantalum Non-Magnetic 1/2W	-	8.20	180
AN Tantalum Non-Magnetic 1W	-	15.5	340
AN Tantalum Non-Magnetic 2W R<100KOhm	-	23.00	510
AN Tantalum Non-Magnetic 2W R>100KOhm	-	32.50	720
AN Tantalum Silver 2W Non-Magnetic	-	54.00	1200

*** Price for ONE resistor

Audio Note Tantalum

These exotic resistors from Japan, sound less dry than the metal films and they do not emphasize any particular frequency range. They sound more natural, more musical.

They work equally well in semiconductor and tube amplifiers. Most customers, who have tried the tantalums, say that they would never go back to the common metalfilm type resistors. Please note that the Audio Note tantalums are not actually Shinkoh manufactured (no longer in business) but are from a second source, these, however share many aspects of the original Shinkoh`s. These have a 1% tolerance.

DIYAUDIO-VN is Official Authorized Distributor of Amtrans Japan, the Carbon Film Resistors AMRG for Hi-End Audio

	DxHmm	US$ each	1000 VND each
Amtrans AMRG 2W 1%	-	4.50	90
Amtrans AMRG 3/4W 1%	-	3.00	60
AMRS 1/2W 5%	-	0.50	10
AMRS 1/4W 5%	-	0.40	8
AMRT 1/4W 5%	-	0.50	10
AMRA 5W 2%	-	1.80	40

Amtrans AMRG Carbon Film Resistors 2W & 3/4W

Current Stock:

AMRG 2W Carbon Film 1%
18R, 47R, 56R, 68R, 100R, 120R, 220R, 270R, 330R, 470R, 560R, 680R, 1K, 1K2, 1K5, 2K2, 2K7, 3K3, 4K7, 6K8, 10K, 15K, 18K, 22K, 27K, 33K, 43K, 47K, 51K, 56K, 68K, 82K, 100K, 120K, 150K, 180K, 220K, 270K, 330K, 390K, 470K, 1M

AMRG 3/4W Carbon Film 1%
10R, 15R, 33R, 47R, 68R, 82R, 100R, 180R, 220R, 270R, 330R, 470R, 560R, 620R, 680R, 750R, 1K, 1K2, 1K5, 2K, 2K2, 2K7, 3K3, 4K7, 6K2, 6K8, 8K2, 10K, 15K, 20K, 22K, 24K, 27K, 33K, 43K, 51K, 62K, 68K, 82K, 100K, 150K, 180K, 220K, 270K, 330K, 470K, 680K, 1M

Amtrans AMRG Carbon Film Resistors 2W & 3/4W

Since the demise of the beloved Riken Ohm carbon film resistors back in 2005/6, with their destinctive blue body, colour code bands and gold plated copper leadouts there hasn`t been a serious contendor to rival them. Until now...

Amtrans, from Japan, used to be the distributor for Riken resistors. In 2005 they bought a resistor factory, whether this was the original Riken premises they wouldn`t confirm. Soon came the AMRG carbon film resistor, which they claim is better than the Riken as they have employed cutting edge technologies for production. Indeed they aren`t far from the truth they are truely amazing.

They are available in 0.75 watt and 2 watt, from 10R to 1.5M in E24 values. we are now stocking the E12 range but will increase the range to E24 in 2011. They have a 1% tolerance, non-magnetic , they are encapsulated in a black anodized aluminum case, potted in a highly thermal conductive resin, gold-plated copper end caps and gold-plated oxygen free copper leadouts. A lot to boast we believe and at an incredible price.

Characteritics:

power rating: 3/4 Watt & 2 Watt
Nominal resistance: E24 sereies, 10R and above
Tolerance: +/- 1%
Max working voltage: 350V (3/4W), 500V (2W)
Operating temperature: -55 to +155 degrees C
Ceramic base: Porcelain rod (alumina)
Resistor film: High quality carbon film
End caps: Cupped plated brass
Lead wire: Gold plated oxygen free copper wire
Potting: Hightly thermal conductive resin
Casing: Anodised Aluminium

***Technical Data AMRG_e.pdf

Amtrans AMRT 2W 5% carbon film: The world first batch of AMRT 2W resistrors

Amtrans AMRS Carbon Film Resistors 1/2W, 1/4W

Current Stock:

AMRS & AMRT 1/2W Carbon Film 5%
10R, 20R, 47R, 75R, 82R, 100R, 110R, 120R, 150R, 220R*, 270R, 330R*, 390R, 470R, 560R, 680R, 820R, 1K, 1K2*, 1K5, 2K, 2K2*, 2K7, 3K3, 3K6, 3K9, 4K7, 5K6, 6K8, 10K*, 12K*, 15K, 18K, 20K, 22K, 27K, 33K, 47K, 68K, 82K, 100K, 100K, 120K, 150K, 220K, 270K, 330K, 470K, 1M, 1M

AMRS & AMRT 1/4W Carbon Film 5%
10R, 18R, 30R, 33R, 36R, 47R, 68R, 75R, 100R, 100R, 110R, 150R, 150R, 180R, 200R, 200R, 300R, 300R, 330R, 360R, 390R, 430R, 470R, 470R, 510R, 560R, 560R, 620R, 620R, 680R, 680R, 750R, 820R, 820R, 1K*, 1K1, 1K2, 1K3, 1K3, 1K5, 1K6, 1K6, 1K8, 2K, 2K, 2K4, 2K7, 2K7, 3K, 3K3, 3K3, 4K3, 4K3, 4K7, 5K1, 5K1, 6K2, 6K2, 7K5, 8K2, 8K2, 10K, 13K, 13K, 15K, 16K, 16K, 18K, 20K, 22K, 22K, 24K, 24K, 27K, 30K, 33K, 33K, 39K, 43K, 47K, 47K, 51K, 56K, 62K, 68K, 68K, 75K, 82K, 91K, 100K, 100K, 150K, 180K, 200K, 220K, 240K, 270K*, 330K, 390K, 470K*, 560K, 1M

AMRT 2W

100R, 470R, 1K, 1K2, 1K5, 2K2, 4K7, 6K8, 10K, 15K, 22K, 27K, 33K, 47K, 68K, 82K, 100K, 150K, 220K, 270K, 330K, 470K, 1M

Amtrans AMRA Metal Oxide Resistors 5W

In response to our customer demands, we has finally been able to source a range of premium "audio-grade" 2-Watt and 5-watt metal oxide resistors. These Japanese-made parts, are robustly made, conservatively designed, 2% tolerance, featuring non-magnetic construction, and RoHS compliant, solder-coated OFHC copper leads. They offer audio constructors an economical, "no worry" alternative, for both power supply and more cost conscious audio applications.

***Technical Data AMRA_e.pdf

AMRA 5W
0R22, 0R47, 0R68, 10R, 47R, 100R, 270R, 470R, 1K, 1K2, 1K5, 2K2, 4K7, 6K8, 8K2, 10K, 12K, 15K, 22K, 27K, 33K, 47K, 68K, 82K, 100K

Duelund Standard Graphite Resistors

Duelund Coherent Audio are widely acknowledged for designing and manufacturing the world’s finest capacitors, inductors, resistors and cables. Their resistors are specifically designed for loudspeaker crossover use. Constructed from a graphite rod with silver terminals in a phenolic cylinder for protection. They have practically zero inductance, with a 5% tolerance. The special charcteristic about this resistor is that it displays a negative temperature coefficient. For example, when the voice coil of a speaker heats up, it's impedance rises. The DUELUND Graphite Resistor counteracts this by means of a decreasing impedance. The results are greatly improved dynamics from the driver.

Dimensions:
Diameter = 8mm, length = 65mm to 135mm.

Duelund CAST Silver Resistors

Stock
DUELUND CAST Silver 10W: 0R5, 1R, 1R5, 2R2, 3R3, 3R9, 4R7, 6R8, 10R, 15R, 20R, 30R, 33R

New from DUELUND, a step up from their standard resistors are their amazing CAST resistors. Constructed from a graphite rod with silver terminals in a phenolic cylinder for protection, using a high temperature epoxy, both as a cavity-fill within the cylinder, and to encapsulate the graphite element. This gives each part incredible mechanical stability, and incredible damping properties. They have practically zero inductance, with a 5% tolerance.The special charcteristic about this resistor is that it displays a negative temperature coefficient. For example, when the voice coil of a speaker heats up, it's impedance rises. The DUELUND Graphite Resistor counteracts this by means of a decreasing impedance. The results are greatly improved dynamics from the driver.

Dimensions:
Diameter = 8mm, length = 65mm to 135mm.

MResist Supreme non-inductive 20W resistors

TKD Metal Film Resistors 2W & 1W

Non-Magnetic, OFHC copper lead, for Audio resistors

	DxHmm	US$ each	1000 VND each
CM2 2W 1% Non-Magnetic	-	1.70	35
CM1 1W 1% Non-Magnetic	-	1.20	25

Current Stock:

TKD CM2 2W 1% Metal Film Non-Magnetic

10R, 33R, 47R, 100R, 220R, 270R, 330R, 470R, 560R, 680R, 820R, 1K, 1K2, 1K5, 1K8, 2K, 2K2, 2K4, 2K7, 3K3, 3K9, 4K7, 5K6, 6K8, 8K2, 10K, 12K, 15K, 18K, 20K, 22K, 24K, 27K, 30K, 33K, 39K, 43K, 47K, 51K, 56K, 62K, 68K, 82K, 100K, 120K, 150K, 180K, 220K, 270K, 330K, 390K, 470K, 560K, 1M, 1M2, 1M5

TKD CM1 1W 1% Metal Film Non-Magnetic

10R, 47R, 100R, 150R, 180R, 220R, 270R, 330R, 390R, 470R, 560R, 620R, 680R, 820R, 1K, 1K2, 1K5, 1K8, 2K, 2K2, 2K7, 3K, 3K3, 3K9, 4K7, 5K1, 5K6, 6K8, 8K2, 10K, 12K, 15K, 18K, 20K, 22K, 24K, 27K, 30K, 33K, 39K, 43K, 47K, 51K, 56K, 62K, 68K, 82K, 100K, 120K, 150K, 180K, 200K, 220K, 240K, 270K, 300K, 330K, 470K, 510K, 560K, 680K, 820K, 1M

	DxHmm	US$ each	1000 VND each
Takman REX 1W 2%	-	1.0	22
Takman REY 1/2W 1%	-	0.75	15
Takman REY 1/4W 1%	-	0.5	10
Takman REX 1/4W 2%	-	0.4	8

Current Stock: Takman 1W REX Carbon Film 2%

10R, 100R, 220R, 270R, 330R, 470R, 560R, 680R, 820R, 1K, 1K2, 1K5, 2K2, 2K7, 3K3, 4K7, 5K6, 6K8, 8K2, 10K, 15K, 18K, 22K, 27K, 33K, 39K, 47K, 68K, 82K, 100K, 120K, 150K, 220K, 270K, 330K, 470K, 1M

Current Stock: Takman 1/4W REX Carbon Film 2%

27R, 47R, 68R, 100R*, 220R, 270R, 470R, 560R, 680R, 1K*, 2K2, 2K67, 2K7, 4K7, 10K, 15K, 20K, 22K, 24K9, 27K, 33K, 43K, 47K, 56K, 62K, 68K, 82K,100K, 150K, 220K, 240K, 330K, 470K, 560K, 1M*

Takman Carbon Films

This is just what the DIY community has been waiting for. TAKMAN, Japan, have developed a truly supreme carbon film resistor, specifically developed for Audio. we are proud to be the stockist of the full E-24 range of both the 0.25W and 0.5W, plus the full E12 range of the 1W resistors.
TAKMAN resistors are already extremely popular in manufactured hi-fi, their notoriety excelerated by their amazing natural tonality and clean detailing.

During development, TAKMAN recognised how sound is influenced by the various structures and materials used in manufacture. Magnetism, inductance, electrification caused by contact resistance and vibration make the sound flat and coloured. Ultimately you will hear an edgy brightness at the highs but overall a lack of accuracy and detail. To remove these incidental noises TAKMAN developed their first audio grade resistor, the MAESTRO, the predecessor to the REX (carbon film) and the REY (metal film). With outstanding specifications, TAKMAN, by making the best of their know-how and sophisticated technology of a resistor-specialized manufacturer have created the best resistor for your audio equipment or circuits seeking for unlimited high-quality sound. So now you can enjoy the great intrinsic characteristics of carbon film resitors - natural and easy to listen to but with greater defined detail and impact. At a great price you will not be disappointed with these amazing gems.

Characteristics

Low distortion
Non-magnetic
Brass end caps and oxygen free copper lead outs
High tolerance (HFC stock the 2% range)
High quality sound

***Technical Data REX.pdf

Current Stock:

Takman 1/4W REY Metal Film 1%
2R2, 10R, 22R, 27R, 33R, 39R, 47R, 51R, 56R, 68R, 75R, 82R, 100R, 110R, 120R, 150R, 180R, 200R, 220R, 240R, 270R, 300R, 330R, 360R, 390R, 470R, 510R, 560R, 680R, 750R, 820R, 1K, 1K1, 1K2, 1K3, 1K5, 1K6, 1K8, 2K, 2K2, 2K4, 2K67, 2K7, 3K, 3K3, 3K9, 4K3, 4K7, 5K1, 5K6, 6K8, 7K5, 8K2, 10K, 12K, 13K, 15K, 16K5, 18K, 20K, 20K5, 22K, 24K, 24K9, 27K, 33K, 39K, 43K, 47K, 51K, 56K, 62K, 68K, 82K, 100K, 120K, 150K, 200K, 240K, 560K

Takman 1/2W REY Metal Film 1% Non-Magnetic

10R, 47R, 100R, 120R, 150R, 220R, 270R, 330R, 390R, 470R, , 560R, 680R, 750R, 820R, 1K, 1K2, 1K5, 1K8, 2K, 2K2, 2K7, 3K, 3K3, 4K7, 5K1, 6K8, 8K2, 10K, 12K, 15K, 18K, 22K, 27K, 33K, 39K, 47K, 51K, 68K, 82K, 100K, 120K, 150K, 200K

Takman Metal Films

Extending the range of the incredibly popular TAKMAN resistors from Japan, we are proud to be stocking the full E24 range of the REY25, 0.25W, REY50, 0.5W metal film, both at 1% tolerance metal film resistor. We also have the full E12 range of the REY75, 1W resistors. A thoroughly modern manufactured resistor designed specifically for Audio.

Takman REY metal film resistor for audio equipment has the features that it consists of resistor thin film made mainly of Ni-Cr-Al materials, brass caps and non-oxygen copper wire. High-precision is realized with laser trimming and high stability and high sound quality are achieved with most proper coating. This resistor is usable for any audio components.
During development, TAKMAN recognised how sound is influenced by the various structures and materials used in manufacture. Magnetism, inductance, electrification caused by contact resistance and vibration make the sound flat and coloured. Ultimately you will hear an edgy brightness at the highs but overall a lack of accuracy and detail. To remove these incidental noises TAKMAN developed their first audio grade resistor, the MAESTRO, the predecessor to the REX (carbon film) and the REY (metal film). With outstanding specifications, TAKMAN, by making the best of their know-how and sophisticated technology of a resistor-specialized manufacturer have created the best resistor for your audio equipment or circuits seeking for unlimited high-quality sound.

Specification: